TEN TECH Case Study: LinkNYC

TEN TECH Case Study: LinkNYC

Published on March 12, 2019
Challenge: Tasked with designing the LinkNYC communications kiosks for all the hazards of outdo...

Case Study: Zonneveld ingenieurs

Case Study: Zonneveld ingenieurs

Published on January 29, 2019
Challenge: Due to poor soil conditions and the rise of oil and gas extraction–related ear...

Interview with Allan Zhong, Technology Manager for Innovation, Halliburton

Interview with Allan Zhong, Technology Manager for Innovation, Halliburton

Published on January 18, 2019
Recently, we had the opportunity to speak with simulation champion, Allan Zhong, a technology m...

Academic Case Study: Electronics That Bend, Not Break

Academic Case Study: Electronics That Bend, Not Break

Published on July 5, 2018
This article was originally published in the June 2018 issue of SIMULIA Community News magazine...

Feet in the Cloud: Part 2

Feet in the Cloud: Part 2

Published on March 1, 2018
This is the second part of a two part article where Digital Orthopaedics talks about how the 3D...

Feet in the Cloud: Part 1

Feet in the Cloud: Part 1

Published on February 15, 2018
Digital Orthopaedics is developing cloud-enabled modeling and simulation tools for foot surgeon...

Industry Perspective: Three Things You Should Be Doing When Setting Up A Production 3D Printing

Industry Perspective: Three Things You Should Be Doing When Setting Up A Production...

Published on January 30, 2018
Mike Vasquez, Ph.D., CEO, 3Degrees, LLC The processing and materials technology for 3D printing...

Part 2 – Customer Highlight: Oak Ridge National Laboratory

Part 2 – Customer Highlight: Oak Ridge National Laboratory

Published on November 16, 2017
This is the second part of a two part interview with Lonnie Love from Oak Ridge National Labora...

Customer Highlight: Oak Ridge National Laboratory

Customer Highlight: Oak Ridge National Laboratory

Published on November 9, 2017
Lonnie J. Love received his B.S. and M.S. degree in mechanical engineering from Old Dominion Un...

Industry Perspective: Disrupting Manufacturing as We Know It

Industry Perspective: Disrupting Manufacturing as We Know It

Published on November 2, 2017
This article was written by Timothy W. Simpson, Ph.D., Paul Morrow Professor of Engineering Des...